Ξεκλείδωσε η δυνατότητα επέκτασης αποθηκευτικού χώρου SSD για τις κονσόλες PS5

Από τις 15 Σεπτεμβρίου είναι πλέον πραγματικότητα η δυνατότητα αναβάθμισης αποθηκευτικού χώρου SSD για τις κονσόλες PS5. To ξεκλείδωμα της δυνατότητας αυτής πραγματοποιήθηκε μέσω ενός firmware update, επιτρέποντας στους ιδιοκτήτες PS5 να προσθέσουν στη συσκευή τους δίσκους SSD που μπορούν να χρησιμοποιήσουν και στο PC τους, υπό προϋποθέσεις βέβαια.

 

Το PlayStation 5 είναι συμβατό μόνο με SSD υψηλότερης ποιότητας PCIe Gen4 x4 NVMe M.2 με ταχύτητες τουλάχιστον 5,5 GB/sec ή υψηλότερες, αλλά υποστηρίζεται ένα ευρύ φάσμα χωρητικότητας που κυμαίνεται από 250 GB έως 4 TB. Η υποδοχή επέκτασης του PS5 θα υποστηρίζει έναν αριθμό μορφών M.2, συμπεριλαμβανομένων των μικρότερων μονάδων δίσκου 2230 που χρησιμοποιούνται στη σειρά X/S, 2242, 2260, 2280 και του μεγαλύτερου 22110.

 

Δείτε παρακάτω τα λεπτομερή διαγράμματα που δείχνουν τις ακριβείς διαστάσεις των M.2 SSD που θα υποστηρίζει το PS5, καθώς και πλήρεις λεπτομέρειες των απαιτήσεων προδιαγραφών:

 

 

PlayStation 5 Expansion SSD Requirements

•     Interface: PCIe Gen4 x4 M.2 NVMe SSD
•     Capacity: 250GB - 4TB
•     Cooling structure: Using an M.2 SSD with your PS5 console requires effective heat dissipation with a cooling structure, such as a heat sink. You can attach one to your M.2 SSD yourself, either in a single-sided format, or double-sided format. There are also M.2 SSDs that have cooling structures (such as heat sinks) built in.
•     Sequential read speed: 5,500MB/s or faster is recommended
•     Module width: 22mm width (25mm width is not supported)
•     Form Factor: M.2 type 2230, 2242, 2260, 2280 and 22110.
•     These numbers can be found on retail listings for M.2 SSD devices. The first two digits refer to the width, the remaining digits to the length.
•     Socket type: Socket 3 (Key M)

Total size including cooling structure:

•     In millimeters: smaller than 110mm (L) x 25mm (W) x 11.25mm (H).
•     In inches: smaller than 4.33in (L) x 0.984 in (W) x 0.442in (H).

See below for full requirements.

Length

•     The following M.2 SSD lengths are compatible with PS5 consoles:
•     30mm, 42mm, 60mm, 80mm, 110mm (corresponding to the form factor type, per above).

Width

•     A 22mm-wide M.2 SSD module is required.
•     The total structure (including an added cooling structure) cannot exceed 25mm (0.984in).

Height

•     The total height of the M.2 SSD and its cooling structure (such as a heat sink) - whether built-in or separate - must be less than 11.25mm (0.442in).
•     The height must also be in the right place, in relation to the M.2 SSD's circuit board:
•     The size below the board must be less than 2.45mm (0.096in). The total size above the board must be less than 8mm (0.314in).
•     (Note: millimeter measurements are the technical standard and are more precise than inches. We recommend double-checking that the total dimensions of M.2 SSD and heat sink products you're considering meet the millimeter requirements before purchasing)
•     M.2 SSD with a built in heat sink dimensions
•     M.2 SSD with a single heat sink
•     M.2 SSD with double heat sinks
•     Both single-sided and double-sided M.2 SSD devices are supported.
•     M.2 SATA SSDs aren't supported.
•     You should carefully review drive specifications prior to purchase and contact the vendor or manufacturer if you need further information. SIE cannot guarantee that all M.2 SSD devices meeting the described specifications will work with your console and assumes no responsibility for the selection, performance or use of third-party products.
•     Not all games are necessarily playable with the exact same performance provided by the PS5 console's internal Ultra-High Speed SSD, even where the M.2 SSD device's sequential read speed is faster than 5500MB/s.
•     The majority of M.2 SSD devices with the above type numbers (M Key Type 2230, 2242, 2260, 2280 and 22110) and without a built-in cooling structure will fit the PS5 console's SSD slot. However, sizes for cooling structures (like heat sinks) vary greatly. If you are not sure an M.2 SSD or cooling structure (such as a heat sink) you're considering meets the size requirements outlined here, we recommend looking for another product option or contacting the vendor or manufacturer for more information.

from https://ift.tt/3ClaUa0